116 lines
3.4 KiB
Arduino
116 lines
3.4 KiB
Arduino
// =====================================================================
|
|
// ESP32_LD2453.ino
|
|
//
|
|
// ESP32-S3 + Hi-Link HLK-LD2453 radar firmware.
|
|
// Ported from https://github.com/thanhtantran/ESP32-LD2450
|
|
//
|
|
// *** LD2453Parser's byte-level decoding is currently a STUB ***
|
|
// See the comment block at the top of LD2453Parser.h for why, and
|
|
// the README for how to help confirm the real protocol. Everything
|
|
// else in this sketch (Wi-Fi, REST API, WebSocket, zones, diagnostic
|
|
// printing) is fully functional today.
|
|
//
|
|
// Copy config.example.h to config.h and edit it before building.
|
|
// =====================================================================
|
|
#include <Arduino.h>
|
|
#include "config.h"
|
|
#include "LD2453Parser.h"
|
|
#include "ZoneManager.h"
|
|
|
|
#if !DIAGNOSTIC_MODE
|
|
#include "WebServerManager.h"
|
|
#endif
|
|
|
|
// ---------------------------------------------------------------
|
|
// Pick the HardwareSerial instance for the radar based on
|
|
// RADAR_UART_PORT in config.h. Serial0/USB is left free for the
|
|
// Serial Monitor.
|
|
// ---------------------------------------------------------------
|
|
#if RADAR_UART_PORT == 1
|
|
HardwareSerial &RadarSerial = Serial1;
|
|
#else
|
|
HardwareSerial &RadarSerial = Serial2;
|
|
#endif
|
|
|
|
LD2453Parser radar;
|
|
ZoneManager zoneManager;
|
|
|
|
#if !DIAGNOSTIC_MODE
|
|
WebServerManager webServer(zoneManager);
|
|
#endif
|
|
|
|
void printDiagnostics(const RadarFrame &frame, const LD2453Stats &stats) {
|
|
Serial.println();
|
|
Serial.println(F("LD2453 connected"));
|
|
Serial.print(F("UART: "));
|
|
Serial.println(RADAR_BAUD_RATE);
|
|
Serial.print(F("Frame length (last): "));
|
|
Serial.println(stats.lastFrameLength);
|
|
Serial.print(F("Parse errors: "));
|
|
Serial.println(stats.parseErrors);
|
|
Serial.print(F("Packets/sec: "));
|
|
Serial.println(stats.packetsPerSecond, 1);
|
|
Serial.print(F("Target count: "));
|
|
Serial.println(frame.targetCount);
|
|
|
|
for (uint8_t i = 0; i < 3; i++) {
|
|
Serial.println();
|
|
Serial.print(F("Target "));
|
|
Serial.print(i + 1);
|
|
Serial.println(':');
|
|
|
|
const RadarTarget &t = frame.targets[i];
|
|
if (!t.valid) {
|
|
Serial.println(F("INVALID"));
|
|
continue;
|
|
}
|
|
Serial.print(F("X: "));
|
|
Serial.print(t.x_mm);
|
|
Serial.println(F(" mm"));
|
|
Serial.print(F("Y: "));
|
|
Serial.print(t.y_mm);
|
|
Serial.println(F(" mm"));
|
|
Serial.print(F("Speed: "));
|
|
Serial.println(t.speed);
|
|
}
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
delay(1500); // lets the Serial Monitor catch up without blocking the app loop later
|
|
|
|
Serial.println(F("=== ESP32_LD2453 booting ==="));
|
|
Serial.print(F("Node ID: "));
|
|
Serial.println(NODE_ID);
|
|
|
|
radar.begin(RadarSerial, RADAR_RX_PIN, RADAR_TX_PIN, RADAR_BAUD_RATE,
|
|
NODE_ID, DEBUG_RADAR_RAW);
|
|
|
|
#if !DIAGNOSTIC_MODE
|
|
webServer.begin(WIFI_SSID, WIFI_PASSWORD);
|
|
#else
|
|
Serial.println(F("DIAGNOSTIC_MODE=1: Wi-Fi/web server disabled. Serial-only output."));
|
|
#endif
|
|
}
|
|
|
|
void loop() {
|
|
// Radar acquisition/parsing is non-blocking and runs every
|
|
// iteration regardless of mode, independent of Wi-Fi state.
|
|
bool gotFrame = radar.update();
|
|
|
|
if (gotFrame) {
|
|
const RadarFrame &frame = radar.getLastFrame();
|
|
zoneManager.update(frame);
|
|
|
|
#if DIAGNOSTIC_MODE
|
|
printDiagnostics(frame, radar.getStats());
|
|
#else
|
|
webServer.broadcastFrame(frame);
|
|
#endif
|
|
}
|
|
|
|
#if !DIAGNOSTIC_MODE
|
|
webServer.loop();
|
|
#endif
|
|
}
|